@fossilesque@mander.xyz to Programmer Humor@lemmy.mlEnglish • 2 months agoNot incorrect.mander.xyzimagemessage-square82fedilinkarrow-up1714arrow-down114
arrow-up1700arrow-down1imageNot incorrect.mander.xyz@fossilesque@mander.xyz to Programmer Humor@lemmy.mlEnglish • 2 months agomessage-square82fedilink
minus-squareTimeSquirrellinkfedilink26•2 months agoCobol: you are old, and a nerd, and probably making some sweet cheddar right now propping up a mid to late 20th century beast somewhere. Assembly: you are a cyborg.
minus-square@anomnom@sh.itjust.workslinkfedilinkEnglish10•2 months ago Assembly: you are a cyborg. Or programming a tiny microcontroller to blink a led as efficient as possible.
minus-squareTimeSquirrellinkfedilink8•2 months agoSomething wrong with: #include <Arduino.h> void loop() { digitalWrite(13, HIGH); delay(1000); digitalWrite(13, LOW); delay(1000); } ? 😂🤮
minus-square@Scrath@lemmy.dbzer0.comlinkfedilink12•2 months agoObviously the only correct way to blink an LED is to use a hardware timer to trigger a DMA transfer which stores a bit in the pin toggle register at a set interval
minus-square@anomnom@sh.itjust.workslinkfedilinkEnglish3•2 months agoyeah! Or or use the interrupt pins and a 555 timer! both options are better than python though at least.
Cobol: you are old, and a nerd, and probably making some sweet cheddar right now propping up a mid to late 20th century beast somewhere.
Assembly: you are a cyborg.
Or programming a tiny microcontroller to blink a led as efficient as possible.
Something wrong with:
#include <Arduino.h> void loop() { digitalWrite(13, HIGH); delay(1000); digitalWrite(13, LOW); delay(1000); }? 😂🤮
Obviously the only correct way to blink an LED is to use a hardware timer to trigger a DMA transfer which stores a bit in the pin toggle register at a set interval
yeah! Or or use the interrupt pins and a 555 timer! both options are better than python though at least.