• @JasonDJ@lemmy.zip
      link
      fedilink
      02 years ago

      How bad could it be? They’d all be piled up at the bottom of one stud cavity and you know they’re there. If you’re demoing the wall you’re gonna have gloves and a shop vac and a bigass broom and shovel anyway.

      Still I got a little blade bank (about the size of those mini soda cans) on Amazon for $7 for my double-edge blades. Last year. And it still has plenty of room in it. Supposedly it holds 300 blades. That’s two blades a week for nearly 3 years. An absurd frequency…I replace my blade every week and I shave my head and they could totally go longer, they’re just so damn cheap.

      • @LittleBorat2@lemmy.ml
        link
        fedilink
        02 years ago

        I think these plastic boxes the blades come in often have a slot for used blades on the bottom. They take up so little space without the paper around them that an entire pack fits into a 1mm slot maybe.

  • Neato
    link
    fedilink
    English
    02 years ago

    A small blade safe can hold hundreds of blades and it’s like 4"x3"x3". Makes sense they thought the inside of drywall 5’x3’x1’ would be fine. It can probably hold tens of thousands. Even with a new blade daily that’s decades. And when you tear down the wall you’re dealing with Sheetrock, nails and screws already. All that time would have dulled the incredibly thin blades.

    This is all to say: it seems wild but was a decent idea.

    • @doggle@lemmy.dbzer0.com
      link
      fedilink
      02 years ago

      It’s a pretty big area back there and razors are very small. It would take decades or maybe evenover a hundred years of regular use before it is likely to fill up. The building could even be condemned or otherwise destroyed before it’s full.

      But yes, if it did somehow fill up, you would need to remove the tiles and cut a section out of the wall to empty it. That’s not so big a deal if you only have to do it every 50+ years.

    • @lars@lemmy.sdf.org
      link
      fedilink
      02 years ago

      I’ve totally been throwing ancient screenshots at almost-matching communities lately, including here, because I am trying get Lemmy some momentum – Lemmentum if you will – and be the change I want to see.

      But yeah no meme here.

  • @Kecessa@sh.itjust.works
    link
    fedilink
    02 years ago

    Safety razors with disposable blades were introduced about 120 years ago, at one blade a day that’s a bit less than 45000 blades

    Double edged blades dimensions are: 0.1mm x 42.7mm x 22mm for 98.21mm³

    45 000 blades would take a volume of 4 419 450mm³ or about 270in³

    A regular indoor wall is made of 2x4 and each stud is 14.5 inches apart (16 inches on center). A 2x4 is in truth 1.5" x 3.5" so each inch of height inside the wall is 3.5 x 14.5 x 1 which is 50.75in³

    45 000 blades stacked perfectly would therefore use 270 / 50.75 = 5.32 inches of the wall’s height… So even if they didn’t stack perfectly, it’s pretty safe to assume that there’s enough space inside the wall for hundreds of years at one blade a day (especially since old houses usually used true 2x4 and had their studs at 24" on center)

    • @redcalcium@lemmy.institute
      link
      fedilink
      02 years ago

      One blade a day?!! Are you a billionaire or something? The acceptable signal to replace the razor is when the pain from the dull blade pulling your hairs makes your eye watery, and then you try to man up for a couple more shaves before accepting defeat and put in a fresh blade.

    • prowess2956
      link
      fedilink
      02 years ago

      Also, most people use blades for more than one day’s shave. I think more like 3 - 7, depending on the blade and how picky the shaver (I get more than seven shaves per blade).

    • @Amaltheamannen@lemmy.ml
      link
      fedilink
      02 years ago

      Assuming they would use the volume perfectly is a pretty big assumption, it’s likely you wouldn’t even get a tenth of that.

  • lapislazuli
    link
    fedilink
    0
    edit-2
    2 years ago

    Wet shaving is still very much a thing; in fact in the last decade or so, it’s had a renaissance of sorts. I’ve been a wet shaver for 2.5 years but decided to buy me an electric shaver because these days I have less time for wet shaving. It can done be quickly but what’s the point if you’ve got to rush it. Links for those who got curious:

    Links for those who are curious: https://www.badgerandblade.com/forum/

    https://www.badgerandblade.com/forum/media/

    https://sharpologist.com/

    https://sopuli.xyz/c/wetshaving@sub.wetshaving.social

    • @barsoap@lemm.ee
      link
      fedilink
      0
      edit-2
      2 years ago

      It can done be quickly but what’s the point if you’ve got to rush it

      Yep a good shave needs time and most of all four passes: first with the grain, that’s for the colleagues, second two at right angles to the grain, that’s for your lover, and the fourth one against the grain, for personal satisfaction.

      OTOH if you know what you’re doing a quick and dirty shave is just as good as an electric one and you don’t have to deal with batteries. If a short buzz cut is all you want do that.

      The whole setup is a bit of a bother if you’re new but basic guidelines:

      1. Shower. Well you don’t 100% need to but dry skin and shaving don’t mix well so do it before.
      2. A whisk and bowl, a cheap synthetic whisk is just fine the natural hair ones are a bugger to deal with anyway (have to take care to dry them properly etc), 5-10 bucks for the whisk, 25ct for the bowl in the euro store they came in a 4-pack, really tiny stainless ones. The rest I use for mise en place.
      3. Shaving cream/soap. Don’t think you’ll get away with using those self-foaming gels in a can they clog the razor, don’t glide well, and I’ve never come across one that’s nice to the skin. Comes in bar or tube form, some are better at gliding some smell better if you’re lucky you get both, I’d put the palmolive shaving cream on #1 as “what to get when you don’t know what you want”: Glides very well, dirt cheap, forgiving when whisking, like a bit over a buck a tube.
      4. The actual foam: This is going to take some trial+error, you want extra water in it but don’t make it a soup, you want fine bubbles and proper shaving cream/soap will make them have standing power (though if you’re in a pinch you can use regular soap, no biggie). It should be nice and sloppy, with two 'c’s. If in doubt, whisk more. Apply, then let soak, make coffee or something. Oh, some people don’t use a bowl to whisk but do it directly on the skin. IMO they’re madmen, it’s like brewing tea in your mouth, but you do you.
      5. The razor. Lots could be said about geometry, about different comb sizes, ultra-fancy blade change mechanisms, long story short buy a Merkur 23C, 30-40 bucks, chrome-plated zinc and brass. Good weight, excellent general-purpose geometry, inexpensive, literally unchanged for a hundred years. You might be tempted to cheap out and get a Wilkinson they sell cheap plastic holders that take standard razor blades but trust me the only reason why they’re selling them is to make people believe standard razor blades suck.
      6. The blades. Feather is the creme de la creme and might be just a bit too sharp for some, and also comparatively pricey. Russian manufacturers generally are good but given the situation let’s boycott them, many western producers have spotty quality, that leaves BIC. Yes, the guys who also make lighters, ballpoint pens and surfboards. Bonus: Carton/wax paper packaging, if you re-wrap used blades and put them back in the carton you can toss them in the bin, no worries. How long a blade lasts depends on many factors, the biggest of which is your personal preference. But even if you buy feather blades and use a new one every day you’ll still end up spending less money than using a cartridge system.
      7. Shaving: See the very top. Be aware of the grain, flip the razor over to wear the blades evenly, occasionally rinse it in the sink, you’ll figure it out. Avoid being silly: Don’t move the thing sideways over the skin that’s how you cut yourself. The geometry of the razor will tell you the right angle, just let it lead. Always make sure there’s good gliding going on, never tolerate resistance. Make funny faces to get skin into places where it’s easier to shave, make it taught, etc. It’s an ancient, secret art, traditionally transmitted from father to son, with a break in tradition you’ll have to rediscover it for yourself.
      8. Cold (not ice cold) rinse. A very good way to wake up.
      9. Aftershave, a deeply personal matter. Generally speaking you want an astringent to stop any bleeding (also micro bleeds you can’t see) and a disinfectant and something nice for the skin, my personal recipe is first alumina alum, rinse, then a bog-standard random face wash from the discounter, says aloe vera. The alum will burn worse than an aftershave with alcohol could ever burn but once you rinse it’s over and I don’t want to sit there with a slightly burning face for half the morning. As said: Deeply personal matter. Use whisky if you want I don’t care.
        • @barsoap@lemm.ee
          link
          fedilink
          0
          edit-2
          2 years ago

          You’re completely right, I described shaving with the extra steps of figuring out what to buy and why to buy it as well as showering and making coffee. I even briefly touched on cooking.

      • lapislazuli
        link
        fedilink
        0
        edit-2
        2 years ago

        Thanks for sharing the instructions with folks here. As I said above, I’ve been a traditional wet shaver for two and a half years, so I pretty much know all this. However, wet shaving takes a lot of time for me and for various physical reasons and limitations, I cannot spend a long time shaving. I’ve learned how to speed up the process, but this means sloppier technique and it shows on my skin. At this point I want to give my skin a break by having a short stubble rather than going for BBS (that stands for BaBy Smooth) every single time. 😄 I don’t mean to scare people away from traditional wet shaving, I’m just speaking for myself, who happens to have some motor function problems etc. If you’re fairly “normal”, there should be no reason not to try traditional wet shaving. It’s a treat and something to look forward to every single time.

  • @Got_Bent@lemmy.world
    link
    fedilink
    02 years ago

    I use those blades in present day.

    When I put in a new blade, I keep the wax paper wrapper, then rewrap the discarded blade in said wax paper before discarding it.

    Give or take twelve years into this endeavor, I’ve had zero issues with this system.

    • @jubilationtcornpone@sh.itjust.works
      link
      fedilink
      English
      02 years ago

      Safety razors are great! They’re way cheaper than “conventional” (3, 4, 5 blade) razor blades. They shave a lot closer, and you can get a variety of different grades of blades to fit your comfort level.

      The only reason the expensive multi-blade disposable razor cartridge became popular was because Gillette enshitified their razors to maximize profit.

      • Flying Squid
        link
        fedilink
        02 years ago

        I have this (I am sure irrational) fear that if I use a safety razor, I will cut the shit out of myself. Which, I realize, goes against the word ‘safety’ in the name.

        • @jubilationtcornpone@sh.itjust.works
          link
          fedilink
          English
          02 years ago

          You do have to be a little more delicate because it is easier to cut yourself but it doesn’t take long to get a feel for it. I doubt I cut myself any more than I did with a 4 blade cartridge.

          • Flying Squid
            link
            fedilink
            02 years ago

            I’ll have to try to get over my fear and try it. How does it do when you haven’t shaved in a few days? Because I’m very lazy about that.

            • @Naz@sh.itjust.works
              link
              fedilink
              0
              edit-2
              2 years ago

              It takes a few weeks for your face to get used to being shaved by a safety razor but once it is, my god.

              It’s like the MSPaint Erase Tool in real life. I used to do electric razor only going over and over and over

              Now it’s like almost pornographic how easy it is to shave – one swipe down, two, three, four… half the face is hairless.

              Four swipes left, left side is hairless.

              Four swipes under the moustache and bam.

              Highly recommended getting over the beginner’s curve, watch some YouTube videos but here’s a Linux primer on how to do it:

              1. Fill shaving cream bowl or basin with warm (not hot water).
              2. Allow horsehair brush to soak in basin for 1-5 minutes.
              3. Shake excess water off the brush
              4. Add about half a toothpaste brush amount of shaving cream to the basin, stir into a rich lather, consistency of yogurt. If it’s foaming up/running there’s too much water. I recommend PRORASO, Menthol (Refresh). One $10 tube lasts 3-6 months. Extremely cost effective.
              5. Run some warm/hot water on a very low pour from sink. This is used to wash hair off your razor between passes.
              6. Sterilize your safety razor with a 55-75% isopropyl alcohol spray. This is optional but prevents any kind of infections, because these razors basically slice open everything including pimples.
              7. Lather up your face. Sides, bottom, moustache, whatever.
              8. Don’t apply excess/heavy pressure, these razors are extremely sharp. Go down in a stripe, flip razor over, do another stripe. Down cuts hair, holding at a mild angle, across (left right) cuts your skin, so never try to slide the razor across your face.
              9. Go slow, practice, once your face is used to it, it becomes second nature and shaving is 10× more pleasurable and convenient than those disposable razors or whatever.
              10. It’s good enough that I recommend it to other people. I’m a man, few things make me actually feel like a man more than a good/proper shave.
    • @Fox@pawb.social
      link
      fedilink
      02 years ago

      I put all my used ones in a clear pill bottle. Plan is to burn them in the next campfire I have so that they never enter the waste stream.

            • @Fox@pawb.social
              link
              fedilink
              0
              edit-2
              2 years ago

              I’m not suggesting burning all trash, I’m suggesting burning a miniscule amount of steel to avoid the risk it poses to human and animal life. It turns into iron oxide (RUST). The fire pit ring itself will have about 100x as much of it.

              • @SpaceNoodle@lemmy.world
                link
                fedilink
                02 years ago

                Sharps disposal literally exists for this reason

                Steel would also office without fire

                Where do you think the rust goes in either case?

                • @Fox@pawb.social
                  link
                  fedilink
                  02 years ago

                  I literally don’t have sharps disposal available to me. The rust will mix with the ash and become dispersed harmlessly into the soil. Look at an iron ore mine and you will see millions of tons of iron oxide, because that’s how iron is usually found in nature.

    • @reverendz@lemmy.ml
      link
      fedilink
      02 years ago

      Safety razors are the best! They are cheap, you can buy a bunch of quality blades for pennies compared to a “Mach 3” or whatever.

      Once you learn how to shave with one, there’s no going back.

        • @Satiric_Weasel@beehaw.org
          link
          fedilink
          English
          02 years ago

          They’re much less irritating to your skin. Disposable razor commercials sold the world on the idea that more blades=closer and smoother shave; when in reality they can really tear up your face and leave razor bumps and ingrown hairs.

        • @Staiden@lemmy.dbzer0.com
          link
          fedilink
          English
          02 years ago

          Just crazy cheap. I spent probably 5 dollars on shaving last year. That’s using the most expensive blades made.

        • ferret
          link
          fedilink
          English
          02 years ago

          The head isn’t on a hinge so you have to manage the angle yourself

          • @Rodeo@lemmy.ca
            link
            fedilink
            02 years ago

            Do they really not make any with a swivel head? That’s a pretty useful feature imo, and certainly would be easy to design for on a safety razor.

            • lad
              link
              fedilink
              02 years ago

              I’d say it’s more of a learning curve question. With a swiwel you get good results most of the time but if it doesn’t work as you need there’s nothing to do. With a solid construction you need to learn to manipulate it efficiently but then it’s that you can use it for any shape of skull. TL;DR convenient ≠ better

              • @Rodeo@lemmy.ca
                link
                fedilink
                02 years ago

                I’ve literally never once had a swivel head razor that didn’t work.

                It really seems like a stretch to make this into a skill issue lol

        • @LemmyKnowsBest@lemmy.world
          link
          fedilink
          0
          edit-2
          2 years ago

          here are some metal fonts to choose from

          Wåll 𣠆ê†åñµ§

          ₩₳ⱠⱠ Ø₣ ₮Ɇ₮₳₦Ʉ₴

          𝖂𝖆𝖑𝖑 𝖔𝖋 𝖙𝖊𝖙𝖆𝖓𝖚𝖘

          山卂ㄥㄥ ㄖ千 ㄒ乇ㄒ卂几ㄩ丂

          𝔚𝔞𝔩𝔩 𝔬𝔣 𝔱𝔢𝔱𝔞𝔫𝔲𝔰

          Wムレレ のキ イ乇イム刀ひ丂

          Ẁ̷͓̯͍͉͆̈́̓̿̋͘̕a̸̢̛̭̱͇̓̀̀̃̾̿̕ͅl̴̨̗͍̼̬̽̍̆̋̿l̶̛̰͙̣͔̠͈̈́͑͋̀̔͝ ̵̡̱̘͙̘̖̙̼̺̘͌o̷̳̼͍̼͛̈́̇͘͝f̵̙̥̹̹͓̼͇̃̎̿́́̈̚̕͜͝ͅ ̶̛̦͍̮̫̇̏̐̽̈́̉̉̓t̸̢̪͖̜̲͈͕̬̙̳̾e̴̱̲̯̣̞̰͛̽͊́̊͐̌͋̓̿ẗ̸͓́̑̂͊͋̍̀͘͠a̵̢̨͍̖̙̼̪͚̼̮͆̓̚n̸̡̳͈̬̺̱͔̳̎̾̀̅̅̈́͑̈́ũ̴͙̀̊̄͌͘̚š̵̲̮̘̰̀̂̈̈͝